Biological feasibility of discharge a local WTTP sludge to sewer network and centralized WWTP; a case study: Tehran, Iran.

Over the recent years, ever-increasing population growth and higher wastewater production has been a challenge for decentralized wastewater treatment plants (WWTPs). In addition, sludge treatment due to high cost for equipment and place make authorities to find a sustainable approach in both of economical and technical perspectives. One of the proposed solutions is transferring the sludge produced from decentralized WWTP to centralized WWTP. However, the appropriate proportional ratio of raw sludge to raw sewage is a challenge, otherwise, it make anaerobic conditions and sewage rotting along the sewer network based on permissible limit of dihydrogen sulfide (H2S) gas (5 ppm). In the present study, seven reactors with different ratios of sludge to raw sewage (0, 15, 20, 25, 50, 75, 100) were used to stimulate the feasibility of transferring Shahrake Gharb WWTP sludge along the wastewater transfer pipe to the centralized sewage treatment south Tehran WWTP plant in Tehran, Iran. The septic situation and H2S emission of different reactors within 7 h (Time to reach the compound in the south treatment plant) was analyzed by gas meter. The results indicated that the optimum ratio of sludge to raw sewage was 15% without H2S production during 7 h. In addition, due to the high volume of sludge produced by the Shahrake Gharb WWTP, the optimal ratio of lime to total solids (TS) in sludge (gr/gr) (0.6) increased the sludge loading rate from 15 to 30% without any H2S emission during the stimulation study period. Therefore, the lime stabilization and transfer of sludge from a decentralized WWTP to a centralized WWTP is a feasible way to manage the sludge and enhance the treatment capacity in local WWTP.

Background-Free SERS Nanosensor for Endogenous Hydrogen Sulfide Detection Based on Prussian Blue-Coated Gold Nanobipyramids.

Surface-enhanced Raman scattering (SERS) has great potential in biological analysis due to its specificity, sensitivity, and non-invasive nature. However, effectively extracting Raman information and avoiding spectral overlapping from biological background interference remain major challenges. In this study, we developed a background-free SERS nanosensor consisting of gold nanobipyramids (Au NBPs) core-Prussian blue (PB) shell (Au NBPs@PB), for endogenous H2S detection. The PB shell degraded quickly upon contact with endogenous H2S, generating a unique Raman signal response in the Raman silent region (1800-2800 cm-1). By taking advantage of the high SERS-activity of Au NBPs and H2S-triggered spectral changes of PB, these SERS nanosensors effectively minimize potential biological interferences. The nanosensor exhibits a detection range of 2.0 µM to 250 µM and a limit of detection (LOD) of 0.34 µM, with good reproducibility and minimal interference. We successfully applied this background-free SERS platform to monitor endogenous H2S concentrations in human serum samples with satisfied results.

Working with cattle slurry on farms: emission and dispersion of hydrogen sulfide gas during stirring.

Over the past 15 years, there have been numerous fatalities related to working with animal slurry. Working with cattle slurry releases toxic gases, in particular, hydrogen sulphide (H2S), which can cause acute central nervous system toxicity, breathing difficulties, and death if exposed to high concentrations. Real-time measurements of H2S gas were taken over distance and time, during the stirring of cattle slurry on farms. Gas was measured at eight slurry stores with differing typical configurations of indoor or outdoor stores and with or without slatted flooring. Highest H2S gas levels were measured from indoor stores under slatted floors, and generally at positions closest to the stirrer or the point of maximum stirring, with levels decreasing with distance from source. Most of the data indicate H2S gas levels increase very rapidly after stirring starts, and mostly decline to baseline levels within 30 min post start of stirring. There were, however, circumstances where gas levels remained high and only started to decline once the stirrer had stopped. H2S gas levels at all farms, at all positions measured were consistently below 10 ppm within 30 min of the stirrer being stopped. The current data highlight areas of the farm and ways of working that have the potential for workers and others to be at risk of exposure to toxic slurry gases. The area should be left to ventilate naturally for at least 30 min after the stirrer has been stopped before re-entering buildings. Influencing the design of stirring equipment and future slurry stores would likely reduce the risk of worker exposure to slurry gases.

Detection of PPB-Level H2S Concentrations in Exhaled Breath Using Au Nanosheet Sensors with Small Variability, High Selectivity, and Long-Term Stability.

The continuous monitoring of hydrogen sulfide (H2S) in exhaled breath enables the detection of health issues such as halitosis and gastrointestinal problems. However, H2S sensors with high selectivity and parts per billion-level detection capability, which are essential for breath analysis, and facile fabrication processes for their integration with other devices are lacking. In this study, we demonstrated Au nanosheet H2S sensors with high selectivity, ppb-level detection capability, and high uniformity by optimizing their fabrication processes: (1) insertion of titanium nitride (TiN) as an adhesion layer to prevent Au agglomeration on the oxide substrate and (2) N2 annealing to improve nanosheet crystallinity. The fabricated Au nanosheets successfully detected H2S at concentrations as low as 5.6 ppb, and the estimated limit of detection was 0.5 ppb, which is superior to that of the human nose (8-13 ppb). In addition, the sensors detected H2S in the exhaled breath of simulated patients at concentrations as low as 175 ppb while showing high selectivity against interfering molecules, such as H2, alcohols, and humidity. Since Au nanosheets with uniform sensor characteristics enable easy device integration, the proposed sensor will be useful for facile health checkups based on breath analysis upon its integration into mobile devices.

A COX2-targeting cancer-specific fluorescent probe for hydrogen sulfide detection in living cells, Caenorhabditis elegans, and zebrafish.

A novel cyclooxygenase-2 (COX-2) targeted H2S-activated cancer-specific fluorescent probe, namely, COX2-H2S, was designed and synthesized, with naphthalimide as the fluorophore and indomethacin as the targeting group. This H2S-sensing probe was developed to differentiate tumor cells from normal cells and was tested in living cells, Caenorhabditis elegans (C. elegans), and zebrafish. The probe could successfully be used for imaging endogenous and exogenous H2S in living cells, demonstrating high sensitivity and specificity and strong anti-interference. COX2-H2S had the ability to not only discern cancer cells from normal cells but also specifically recognize 9L/lacZ cells from other glioblastoma cells (U87-MG and LN229). It could also be successfully applied for the fluorescent live imaging of H2S in both C. elegans and zebrafish.

Emission and spatial variation characteristics of odorous pollutants in the aerobic tank of an underground wastewater treatment plant (UWWTP) in southern China.

In this study, the spatial concentration of odorous pollutants in the aerobic tank of an underground wastewater treatment plant (UWWTP) in southern China is monitored. The odour activity value, odour contribution rate, and chemical concentration contribution rate are used to evaluate the degree of contribution of odorous substances. Computational fluid dynamics (CFD) simulations of odorous pollutant diffusion are also established. The study shows that the odorous substances detected in the aerobic tank mainly included ammonia (NH3), hydrogen sulfide (H2S), trimethylamine (C3H9N), and methanethiol (CH3SH), and their concentrations are 1.160, 0.778, 0.022, and 0.0006 mg/m3, respectively. The total odour activity value of the aerobic tank is 450.72 (dimensionless), of which the odour activity value of H2S is 432.22, and the contribution rate reaches 95.9%. H2S is the main contributor to odour and a key controlled substance. The air inlets and exhaust outlets in the aerobic tank are cross-arranged at the top of the space, and the CFD model of odorous pollutant diffusion shows that the gas flow organization determines the odorous pollutant diffusion. The spatial distribution of gas flow and odorous substances in the aerobic tank is relatively uniform, and the odour collection efficiency is higher. The production flux and production coefficient of H2S in the aerobic tank are calculated as 25.831 mg/(m2·h) and 14.149 mg/t, respectively. This study determines the reasonable air supply and exhaust design of the aerobic tank, the number of odour pollutants, and the key controlled substances. These findings offer guidance and serve as useful references for the prevention and control of odour pollution in aerobic tanks of the same type of UWWTPs.

A Turn-On Fluorescent Probe for Highly Selective Detection and Visualization of Hydrogen Sulfide in Fungi.

Hydrogen sulfide (H2S) is a significant actor in the virulence and pathogenicity of fungi. The analysis of endogenous H2S in fungi benefits the prevention and treatment of pathogenic infections. Herein, a H2S-activated turn-on fluorescent probe named DDX-DNP was developed for the sensitive and selective detection of H2S. Using DDX-DNP, the ability of several oral fungi strains to produce H2S was identified, which was also validated using a typical chromogenic medium. In addition, DDX-DNP was successfully used for the visual sensing of endogenous H2S in fungal cells via microscope, flow cytometry, and colony imaging, along with a specific validation with the co-incubation of H2S production inhibitors in living cells. Above all, DDX-DNP could be used for H2S detection, the fluorescent imaging of fungi, and even the identification of related fungi.

Role of exhaled hydrogen sulfide in the diagnosis of colorectal cancer.

BACKGROUND: Colorectal cancer (CRC) is often accompanied by increased excretion of hydrogen sulfide (H2S). This study aimed to explore the value of exhaled H2S in the diagnosis of CRC. METHODS: A total of 80 people with normal colonoscopy results and 57 patients with CRC were enrolled into the present observational cohort study. Exhaled oral and nasal H2S were detected by Nanocoulomb breath analyser. Results were compared between the two groups. Receiver operating characteristic (ROC) curves were analysed and area under the curves (AUCs) were calculated to assess the diagnostic value of exhaled H2S. Meanwhile, the clinicopathological features, including gender, lesion location and tumour staging of patients with CRC, were also collected and analysed. RESULTS: The amount of exhaled H2S from patients with CRC was significantly higher than that of those with normal colonoscopy results. The ROC curve showed an AUC value of 0.73 and 0.71 based on oral and nasal H2S detection, respectively. The exhaled H2S in patients with CRC was correlated with gender, lesion location and tumour progression, including depth of invasion, lymphatic metastasis and TNM (Tumor, Lymph Nodes, Metastasis) staging. CONCLUSION: Exhaled H2S analysis is a convenient and non-invasive detection method for diagnosing CRC, suggesting a potential role in population screening for CRC.

Achieving One Part Per Billion Hydrogen Sulfide (H2S) Level Detection through Optimizing Composition and Crystallinity of Gold-Decorated Tungsten Trioxide (Au-WO3) Nanofibers.

As a common environmental pollutant and an important breath biomarker for several diseases, it is essential to develop a hydrogen sulfide gas sensor with a low-ppb level detection limit to prevent harmful gas exposure and allow early diagnoses of diseases in low-resource settings. Gold doped/decorated tungsten trioxide (Au-WO3) nanofibers with various compositions and crystallinities were synthesized to optimize H2S-sensing performance. Systematically experimental results demonstrated the ability to detect 1 ppb H2S with a response value (Rair/Rgas) of 2.01 using a 5 at % Au-WO3 nanofibers with average grain sizes of around 15 nm. Additionally, energy barrier difference of sensing materials in air and nitrogen (ΔEb) and power law exponent (n) were determined to be 0.36 eV and 0.7, respectively, at 450 °C indicating that O- is predominately ionic oxygen species and adsorption of O- significantly altered the Schottky barrier between the grain. Such quantitative analysis provides a comprehensive understanding of H2S detection mechanism.

A structural optimized fluorescent probe for monitoring hydrogen sulfide in cells and zebrafish.

In this work, we reported a fluorescent probe Fur-SH, a derivative of benzofuranone, which was used to detect H2S in living cells and zebrafish. Based on the three structural characteristics of the probe, the effects of different structural modifications on the optical properties of the fluorophore were compared. Then, the fluorophore Fur-OH was synthesized by modifying diethylamino group with benzofuranone as the main skeleton. With 2,4-dinitrofluorobenzene as the recognition group and diethylamino as the electron donor, the push-pull electron effect occurred with nitro group, which led to fluorescence quenching, and an openable fluorescent probe Fur-SH was formed. The probe Fur-SH (λex = 510 nm; λem = 570 nm) had the advantages of smaller full width at half maxima, rapid response (5 min) and wide pH window. The quantitative properties of the probe were excellent, reaching saturation at 50 equivalents of substrate. The probe Fur-SH showed high sensitivity to H2S, with LOD of 48.9 nM and LOQ of 50 nM. At present, the probe Fur-SH had been applied to fluorescence imaging of MCF-7 cells and zebrafish. By comparing the effects of different structures on the optical properties of fluorophores, this work was expected to be helpful to the development of fluorescent probes in the future.

Control of odorants in swine manure and food waste co-composting via zero-valent iron /H2O2 system.

Odors have posed challenges to the advancement of aerobic composting. This work aims to identify the primary components responsible for odors and assess the effectiveness and mechanisms of the zero-valent iron/H2O2 system controlling various odorants in aerobic composting. Swine manure and food waste were used as composting materials, with the addition of zero-valent iron and hydrogen peroxide to mitigate odor emissions. Results revealed that odorants included ammonia, hydrogen sulfide, and 22 types of volatile organic compounds (VOCs), with ethyl acetate, heptane, and dimethyl disulfide being predominant. Among the odorants emitted, ammonia accounted for 75.43%, hydrogen sulfide for 0.09%, and identified VOCs for 24.48%. The ZVI/H2O2 system showed a significant reduction in ammonia and VOCs emission, with the reduction of 51% (ammonia) and 41.3% (VOCs) respectively, primarily observed during the thermophilic period. The occurrence of Fenton-like reactions and changes in key microbial populations were the main mechanisms accounting for odor control. The occurrence of Fenton-like reaction was confirmed by X-ray photoelectron spectroscopy and reactive oxygen detection, showing the oxidation of zero-valent iron by H2O2 to higher valence elemental iron, and the simultaneous production of ·OH. Microbial analysis indicated that an enrichment of specific microorganisms with Bacillus contributed to feammonx and Bacillaceae contributed to organic biodegradation. Redundancy analysis highlighted the role of key microbial species (Bacillaceae, Bacillus, and Ureibacillus) in effectively reducing the level of ammonia and volatile organic compounds. These novelty findings illustrated that the potential of this system is promising for controlling the emission of odorants and aerobic composting reinforcement.

Dual-channel versatile molecular sensing platform for individual and successive HClO and H2S detection: Applicable in toxic alerts of environmental samples and living organisms.

In this study, we have successfully developed a novel dual-response fluorescent probe, NACou, designed for the visual and quantitative detection of HClO/H2S in real water samples and liquid beverages by a thin-film sensing platform. Additionally, NACou demonstrated efficacy for sensing HClO/H2S in HeLa cells, plants and zebrafish through distinct fluorescent channels, yielding satisfactory results. NACou exhibited a multi-modal fluorescence response mechanism for detecting HClO and H2S with remarkable low detection limits of 27.8 nM and 34.4 nM, accompanied by outstanding fluorescent enhancement (209-fold and 148-fold, respectively). These advantages position NACou as a potent molecular tool for HClO and H2S sensing. The specific recognition performance of NACou towards HClO/H2S were confirmed through fluorescence spectroscopy, mass analysis and UV-vis spectroscopy. Importantly, the thin-film sensing platform with the visible fluorescence change can enable rapid assays for water quality and food safety monitoring, showcasing significant practical application value. Impressively, NACou has been employed in warning against liver injury induced by multiple drugs, allowing for the exploration of the pathogenesis and degree of drug-induced injury.

Exposure to low levels of hydrogen sulphide and its impact on chronic obstructive pulmonary disease and lung function in the geothermal area of Mt. Amiata in Italy: The cross-sectional InVETTA study.

BACKGROUND: The geothermal power plants for electricity production currently active in Italy are all located in Mt. Amiata area in the Tuscany region. A cross-sectional survey was conducted in the framework of the regional project "InVETTA-Biomonitoring Survey and Epidemiological Evaluations for the Protection of Health in the Amiata Territories", using objective measures of lung function to investigate the role of hydrogen sulphide (H2S) in affecting the respiratory health of the population living in this area. METHODS: 2018 adults aged 18-70 were enrolled during 2017-2019. Home and workplace addresses of participants were geocoded. Dispersion modelling was used to evaluate the spatial variability of exposure to H2S from the geothermal power plants' emissions. We estimated average long-term historical exposure to H2S and more recent exposure indicators. Chronic Obstructive Pulmonary Disease (COPD) was defined according to the Global Initiative for Chronic Obstructive Lung Disease (GOLD). Multivariable logistic regressions were performed to investigate associations between outcome and exposure. RESULTS: Our findings did not showed any evidence of an association between increasing H2S exposure and lung function impairments. Some risk reductions were observed: a -32.8% (p = 0.003) for FEV1<80% and a -51.7% (p = 0.001) risk decrease for FVC<80% were associated with interquartile increase (13.8 µg/m3) of H2S levels. CONCLUSION: Our study provides no evidence that chronic exposure to low levels of H2S is associated with decrements in pulmonary function, suggesting that ambient H2S exposure may benefit lung function.

Atmospheric parameters play an important role in driving hydrogen sulphide concentrations in ambient air near waste management centres.

Emissions of odorous compounds are major contributors to public opposition when siting waste management facilities. Thus, it is essential to understand how to minimise the concentration of odour-causing chemicals in ambient air surrounding such facilities. Although the concentration of pollutants in the atmosphere is a function of meteorology, there is limited data on the atmospheric parameters that drive ambient air concentrations of odour-causing substances in settlements near waste management facilities. Here, we analysed how temperature, wind direction, wind speed, atmospheric pressure and humidity impact the concentrations of hydrogen sulphide (H2S) in the ambient air, a potentially toxic chemical and a chief contributor to noxious odours. The relative contribution of each variable was assessed using multivariate statistical analysis applied to an extensive data set of over 7,000 data points collected during 2021. Our results show that all tested atmospheric parameters significantly affected H2S concentrations in ambient air. Wind direction had the greatest impact on H2S concentrations, followed by temperature, humidity, atmospheric pressure and wind speed. Specifically, the concentration of H2S was positively correlated with humidity and atmospheric pressure and had a U-shaped correlation with temperature. Atmospheric variables were able to explain 15% of variation in H2S concentrations (R2 = 15%), indicating the presence of other factors affecting H2S ambient air concentrations. Our study shows that proper consideration of atmospheric parameters, especially wind direction and temperatures, is of uttermost importance when siting waste management facilities. The conclusions are broadly applicable to odorous compounds near waste management facilities, so adverse effects to human health and the environment can be minimised.

Electrochemical sensor for hydrogen sulfide detection using electrocatalysis-assisted amplification and chemical reaction-mediated signal enhancement.

An ultrasensitive electrochemical biosensing platform has been designed by combining electrocatalysis-assisted H2S amplification with a chemical reaction-mediated electrochemical signal-boosted system for H2S detection based on Cu-Mn(OH)2 hexagonal nanorings. The signal amplification is initiated by an electrocatalysis reaction that can grasp specific H2S substrates and further highly amplify electrochemical signals. Then, the unique chemical reaction is powered by copper ion and generates a large amount of electroactive CuxS products on the electrode surface, thus achieving the multiple amplification of H2S detection. Finally, the Cu-Mn(OH)2 loaded with plenty of electroactive CuxS can be captured on the electrode for further improving the electrochemical signal thus obtaining ultra-high sensitive determination of H2S. The established electrochemical biosensing platform displays a wide analytical range of 0.1 µM to 265 µM with a low detection limit of 0.096 µM. The satisfactory selectivity allows the electrochemical sensor to distinguish H2S from other interfering substances without any complicated pretreatment, even in complex tumor cell samples. Thus, our designed electrocatalysis-assisted amplification strategy offers a powerful analysis toolkit for the early determination of H2S-related disease in clinical diagnosis.

Exploring the link between sulphur-containing compounds and noxious odours at waste management facilities: implications for odour monitoring and mitigation strategies.

With this study we challenge the widely held assumption that sulphur-containing compounds in ambient air are good indicators of the presence noxious odours near waste management facilities. We analysed an extensive set of olfactometric data and data on the concentrations of hydrogen sulphide and trace sulphur compounds (TSCs) near a waste management facility in Croatia in 2021. The results show that the presence of noxious odours significantly correlates only with the concentrations of hydrogen sulphide and methyl mercaptan in ambient air but not with other measured TSCs. Thus, in addition to the measurement of pollutants in ambient air, Integrated Pollution and Prevention Control (IPPC) permits should mandate olfactometric measurements to detect and mitigate noxious odours near waste management facilities.

A cross-sectional study of sensory-motor neuropsychological function among sewage plant and sewage net workers exposed to hydrogen sulphide when handling wastewater.

OBJECTIVES: Workers at sewage treatment plants are exposed to a complex mixture of toxins, including hydrogen sulphide (H2S). An issue of concern among sewage workers, is possible negative nervous system effects from low-level H2S exposure. Empirical neuropsychological evidence indicates both that low-dose exposure to H2S exposure affects the nervous system, and the contrary, that such exposure may facilitate nervous system function, since H2S is an endogenously produced central nervous system (CNS) gasotransmitter. The aim of this study is to describe a possible association between the H2S component of the total exposure and long-term effects on neuropsychological motor function among wastewater workers. METHODS: Workers (N = 138) treating wastewater in 6 sewage-treatment plants, or in the sewer net system participated in a cross-sectional study. H2S exposure was expressed in a dichotomous exposure variable defining currently H2S-exposed (N = 112) and unexposed referent workers (N = 26), and a variable defining a job-exposure matrix for long-term total typical workplace H2S exposure. The participants went through neuropsychological tests for hand coordination, reaction time (SRT), and balance, and completed questionnaires. Pearson chi-square test or independent samples t-test was used when comparing the currently H2S-exposed workers with the unexposed control group. Multiple linear regression was used to assess associations between the independent variables age, smoking and exposure variables, and the neuropsychological tests. RESULTS: The analyses indicate increased SRT in the currently H2S-exposed group compared to controls (mean [SD] = 225.8 [29.9] versus 210.7 [26.3] ms, P = 0.019), and an association between increased SRT and current H2S-exposure in the total study sample (ß = 14.7, P = 0.026, R2 = 0.06, P = 0.050). Blindfolded balance testing indicates a nonsignificant trend in the total study sample, of reduced balance in the highest versus lowest H2S total long-term exposure-index group (Sway area [mean {SD}, mm2: 702 [410] versus 581 [278]), and a significant association between total long-term H2S exposure and reduced balance among smokers (Sway area, mm2 [ß = 38.7, P = 0.039], mean sway, mm [ß = 0.3, P = 0.015]). CONCLUSION: The observed trends and associations may be due to exposure peaks in certain work operations and pinpoint the importance of minimizing and avoiding exposure peaks, also when H2S time-weighted average measurements do not exceed an occupational exposure limit of 5 ppm.

Liposome Based Near-Infrared Sensors for the Selective Detection of Hydrogen Sulfide.

Cyanine dye-based new amphiphilic compound NIR-Amp has been synthesised. NIR-Amp was embedded with phospholipids DOPC and DPPC to form liposomes based nanoscale chemical sensors NIR-Lip1 and NIR-Lip2. Here, two different phospholipids were used to demonstrate the influence of lipid structure, composition and fluidity on sensing of nanosensors. Both the probes show NIR absorption maximum at 790 nm and emission maximum at 815 nm. H2 S-triggered thiolation resulted a remarkable change in color from green to pale yellow. A decrease in UV-Vis absorption and emission in the NIR region was observed only with H2 S. NIR-Lip1 and NIR-Lip2 are highly selective for H2 S with a LOD of 0.57 µM and 1.24 µM, respectively. It was observed that in a solid-like gel state, NIR-Lip1 is slightly more sensitive towards H2 S than fluid-like NIR-Lip2. The H2 S sensing mechanism was confirmed by ESI-mass and infrared (IR) spectroscopic analysis. Based on the high sensitivity and selectivity, NIR-Lip1 was employed to detect H2 S in vegetable samples. Further, the probes are found to be non-toxic and established for H2 S fluorescence imaging in live cells.

Odour mapping and air quality analysis of a wastewater treatment plant at a seaside tourist area.

Although wastewater treatment plants (WWTPs) play a fundamental role in protecting the aquatic environment as they prevent organic matter, nutrients and other pollutants from reaching the natural ecosystems, near residential areas they can generate unpleasant smells and noise. The plant studied in the present work is in a seaside tourist area in the Valencian Community, Spain. The main aim was to detect any possible perceptible H2S concentrations from the WWTP by experimental measurement campaigns (including sensor readings and olfactometry measurements by two experts) plus mathematical modelling. After a thorough data analysis of the essential variables involved, such as wind speed, wind direction and H2S concentrations (the main odorant) and comparing their temporal patterns, it was found that the probability of affecting the residential area was highest from June to August before noon and in the late evening. The hourly H2S concentration, influent flow rate and temperature showed a positive correlation, the strongest (R2 = 0.89) being the relationship between the H2S concentration and influent flow rate. These two variables followed a similar daily pattern and indicated that H2S was emitted when influent wastewater was being pumped into the biological reactor. The H2S median concentration at the source of the emission was below 1393.865 µg/m3 (1 ppm), although concentrations 10 times higher were occasionally recorded. The observed H2S peak-to-mean ratio (1 min to 1 h of integration times) ranged from 1.15 to 16.03. This ratio and its attenuation with distance from the source depended on the atmospheric stability. Both H2S concentrations and variability were considerably reduced after submerging the inlet. The AERMOD modelling framework and applying the peak-to-mean ratio were used to map the peak H2S concentration and determine the best conditions to eliminate the unpleasant odour.

A Visual Color Response Test Paper for the Detection of Hydrogen Sulfide Gas in the Air.

Hydrogen sulfide (H2S) is widely found in oil and natural gas wells and industrial wastewater tanks. Owing to its high toxicity, the monitoring and detection of H2S in the air is essential. However, recent techniques for the quantitative detection of H2S gas suffer from limitations such as high cost, complicated operation, and insufficient sensitivity, preventing their practical application in industry. Thus, we have developed a portable test paper for real-time and inexpensive monitoring of H2S gas by color changes. The test paper had a significantly low H2S detection limit of 200 ppb, which is considered safe for humans. Moreover, the color of the test paper did not change noticeably when exposed to CO2, N2, O2, and air environments, indicating that the test paper is selective for H2S gas and can be stored for a long time. In addition, we fitted a color difference linear model between the color difference values (ΔE) and the concentrations of H2S gas. The establishment of the linear model substantiates that the test paper can provide accurate intensity information when detecting H2S gas leakage.